Products
High Pressure Air Bubble Vegetable Cleaning Line
Location: Home page > Products
High Pressure Air Bubble Vegetable Cleaning Line
1. Stainless steel sieve width: 800mm, net width:760mm, sieve spacing: 3.5mm
2. Drive motor: direct-coupled stepless regulating motor(power: 1.1kw)1 set;
3. Water tank: 2mmthick stainless steel plate, tank length: 4060mm;
4. Frame post: 40×60 square tube, punched sieve guard plate 2mmthick edgefolded, seieve support rail: 3mm thick, edgefolded;
5. High pressure vortex pump 1 set(Power: 1.1kw), stainless steel air bubble tubes in water tank 1 set;
6. Showering device at sieve belt lifting position, equipped with stainless steel water tray under shower pipe;
7. Water receive tray under sieve belt lifting position, discharging chute mounted at the discharge port,
8. water recycle and filter device 1 set, basket type filter net with front water spraying;
9. Water recycle system with water pump equipped 1 set(1.1kw);
10. Stainless steel bearing, engineering plastic outer covering;
 
 Ice water color-protecting device
1. Stainless steel sieve width, net width 660mm, sieve spacing 3.5mm;
2. Drive motor: direct-coupled stepless regulating motor;
3. Water tank 2mmhigh quality stainless steel plate, tank length: 3660mm;
4. Machine frame post: 40×60×2方 square tube, punched sieve guard plate 2mmthick edgefolded, seieve support rail: 3mm thick, edgefolded;
5. Water receive tray under sieve belt lifting position, discharging chute mounted at the discharge port,
6. Water recycle system with water pump equipped 1 set(1.1kw);
7. Stainless steel refrigerating coil at the tank bottom, externally connected 1 set 10hp air-cooling type refrigerating unit;
8. Stainless steel bearing, engineering plastic outer covering;
 
Oscillation draining device
1. Oscillation motor 0.4kw×2 units;
2. Oscillation bed is designed into 3 stages, drainage plate is 2mm thick stainless steel perforated plate, with water receive tray mounted.
3. Oscillation bed plate:3mm stainless steel plate, motor plate thickness:10mm(hot-dip galvanized);
4. Frame post: 75×45×2mm stainless steel square tubes;
5. Stainless steel water receive tray mounted on the machine frame.
Up: LWX-104 Vortex type   Next: MAP-YHH400 M.A.P. Fo
Back Close